Benda has taken its first step into adventure bikes with the Capra 700, a 692cc V-twin developed for Europe. The EICMA newcomer combines a tall screen and bodywork with a 21-inch front wheel, an 18-inch rear and long-travel suspension.

A 692cc V-twin and a slipper clutch

The liquid-cooled engine is a 65-degree V-twin, with a claimed 72hp (54kW) at 9,000rpm and 68Nm at 6,500rpm. It has electronic throttle control, a six-speed gearbox and a wet multi-plate slipper clutch, with chain final drive.

Long travel, full-size proportions

The Capra's upright stance comes with substantial suspension travel. An upside-down fork offers 230mm at the front, while the linkage-operated rear monoshock gives 220mm of rear-wheel travel. Compression and rebound damping are adjustable at both ends, and the rear shock has a separate reservoir.

The wheels wear a 90/90-21 front tyre and a 150/70-18 rear. Benda quotes an 850mm seat height and 220kg kerb weight, with an 18-litre fuel tank. Those are useful figures to keep alongside the tall stance: this is a full-size adventure bike, even with a middleweight engine.

Side view of the Capra 700 showing its V-twin engine, high front mudguard and spoked wheels.
The Capra combines a tall screen with long-travel suspension. · Benda

A steel frame and aluminium swingarm form the chassis. The front brake uses a single disc and a radial four-piston caliper; a single-piston caliper handles the rear disc. Two-channel ABS and traction control are included in the announced equipment.

A tank-top rack and a distinctive face

The styling gives the Capra a recognisable face. A round headlight sits between sharp lighting elements, with fog lights incorporated into the front bodywork. Grey panels, yellow details and a high-mounted dual exhaust carry through to the rear.

There is practical hardware in the design too. Tubular crash bars wrap around the engine area, and the small rack above the tank has slots for attaching equipment. The rack is one of the more unusual details on a bike otherwise built around familiar adventure-bike proportions.

Rear three-quarter view of the Capra 700, showing the stepped seat, rear rack and chain drive.
A rear view of the Capra’s bodywork and carrying hardware. · Benda

A vertical TFT handles the instruments, with USB-A charging for a phone or other small device.

US and European prices and dealer arrival dates are still to be confirmed.