BSA is taking the Bantam in two distinct directions with the Bobber 350 and Scrambler 350, unveiled at EICMA 2026 alongside a higher-spec Bobber SP. The split goes deeper than styling: the Bobber gets a low single seat and rear monoshock, the Scrambler adopts longer suspension dimensions and twin shocks, and the SP brings its own fork and wheel specification.

Both newcomers use the Bantam family's 334cc liquid-cooled, DOHC single-cylinder engine architecture. Their claimed outputs are close—27.8hp (20.7kW) for the Bobber and 28.6hp (21.3kW) for the Scrambler—so the more revealing differences are in their dimensions and chassis equipment.

Bobber: a lower seat and a solo layout

The Bobber's 742mm seat sits 58mm below the Bantam roadster's 800mm perch. It is a single-seater, making the solo layout a practical consideration rather than just a visual signature. A 1,500mm wheelbase and claimed 189kg wet weight complete the main dimensions; the low seat does not make this a featherweight motorcycle.

BSA Bantam Bobber 350 with a red tank and single seat.
The standard Bobber has a 742mm single seat, conventional telescopic forks and a rear monoshock. · MCN

Its claimed 27.8hp (20.7kW) arrives at 8,000rpm, driving through a six-speed gearbox and chain. The standard suspension consists of 41mm telescopic forks and a gas-charged rear monoshock with seven-step preload adjustment. A single 320mm front disc and 240mm rear disc work with dual-channel ABS.

The Bobber carries 13.2 litres of fuel and launches in red and grey. Those are straightforward everyday details, but the single-seat arrangement is likely to be the more decisive buying consideration for anyone who occasionally carries a passenger.

What changes on the Bobber SP

SP stands for Special Parts, and BSA describes this version as a special edition. It adds a dark chrome finish, gold 41mm upside-down forks and a colour TFT instrument display. Its 16-inch spoked wheels wear a 130/90-16 front tyre and 150/80-16 rear, replacing the standard bike's larger-diameter wheel combination.

BSA Bantam Bobber SP with a dark chrome tank and gold upside-down forks.
The SP changes more than the finish: gold upside-down forks and 16-inch spoked wheels distinguish it from the standard Bobber. · MCN

That makes the SP a genuine equipment alternative, not simply another paint scheme. It retains the standard Bobber's engine, 742mm seat, 1,500mm wheelbase and claimed 189kg wet weight, so the changes centre on the suspension, wheels and instruments rather than extra engine performance.

Scrambler: different wheels, suspension and proportions

The Scrambler takes its design inspiration from the 1966 BSA Bushman. Beneath that historical reference, BSA describes engine development aimed at reducing weight and increasing power, with gearing tuned for low- and midrange torque. Those are development objectives, not a substitute for a riding assessment.

Claimed output is 28.6hp (21.3kW) at 8,100rpm, with 22.1lb-ft—approximately 30.0Nm—at 6,750rpm. The small power difference from the Bobber is less significant to the Scrambler's identity than its wheel and suspension choices.

It runs 36-spoke wheels, 19 inches at the front and 17 at the rear, with semi-knobbly tyres. A gaitered telescopic fork provides 150mm of stroke, while twin rear shocks offer five-step preload adjustment and 130mm of rear wheel travel. Against the Bantam roadster, those figures represent 15mm more fork stroke and 30mm more rear wheel travel: a concrete chassis change beneath the scrambler styling.

Rear three-quarter view of the green BSA Bantam Scrambler 350 showing its spoked rear wheel and twin shocks.
The Scrambler's twin rear shocks offer five-step preload adjustment and 130mm of rear wheel travel. · MCN

The Scrambler's 812mm seat is 70mm higher than the Bobber's. Its 1,403mm wheelbase is 97mm shorter, while its claimed 184kg wet weight is 5kg lower. Together, those figures underline how differently the two bikes are packaged despite their shared engine family.

Braking uses a 320mm floating front disc and a 240mm rear disc with ABS. Fuel capacity is 12.5 litres, slightly below the Bobber's, and the Scrambler's colour choices are black, green and grey.

Warranty and buying information

The Euro 5+ specifications list a three-year, unlimited-mileage warranty. That is useful ownership information alongside the hardware differences, particularly for buyers considering the Bantam family as an everyday motorcycle.

Sales are expected in 2027. US and European pricing, including Sweden, and local delivery dates are still to be confirmed.